Top or Bottom Mount with Attached U-Clamp (Provides Alternative to Using Traditional Header Systems)
Attached U-Clamp has Same Design and Profile as Hinge
Can Also Be Mounted at Bottom of Door and Adjacent Panel for Symmetry
5/16" (8 mm) to 3/8" (10 mm) Tempered Safety Glass
Custom Finishes Available
Using two hinges with 5/16" to 3/8" glass (8 to 10 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum width of 31" (787 mm).
Glass Thickness: 5/16" (8 mm) to 3/8" (10 mm) Tempered Safety Glass
Special Features: Top and Bottom Mount design allows more glass to show. Use of these hinges will reduce quantity of cut-outs required when compared to standard side mount glass-to-glass hinges. Cat. No. PPH01 can be mounted floor and ceiling, or floor and header.
Construction: Solid Brass
Hinge Swings: Full Rotation
Closing Type: Self-Centering when within 15º of closed position.
Optional 5º Pivot Pin set: Optional 5º
Pivot Pin Sets are available when you want to alter the closing position
of the door by 5º. These Pivot Pins may be inserted prior to
installation, or retrofitted after the installation is complete. Sold as
a set: One for the top, and one for the bottom. Not included with hinge